left_corner_bg righttopcornerbg
Vibration Absorber

GTR Vibration Absorber model RVT series are designed to install in the suction and discharge lines of air conditioning and other refrigeration systems to reduce vibration in the transmission of compressor-induced vibration through system piping.

GTR Vibration are produced by deep pitch corrugated rubbing for increasing flexibility and vibration absorption, covered by high tensile wire braid for superior strength .

The tubing and braid are reinforced by ferrules at each end, and connected to a female copper tube end by high temperature of brazed alloys.

Each GTR Vibration Absorber is tested for pressure and then carefully vacuum tested by using sensitive helium mass spectrometer leak detection device

vibration_absorber
leftbottomcornerbg rightbotomcornerbg
 
Normal Size (in) Weight Dimension Max Working Pressure (psig) Burst Pressure(psig)
A(I.D) B(±1/8) C(±1/8) D(±1/4) E(±1/16)
3/8 130 3/8 13/16 6-5/18 8-9/16 1/2 500 2500
1/2 135 1/2 7/8 7-1/4 9 1/2 500 2500
5/8 200 5/8 15/16 8 9-7/8   500 2500
3/4 220 3/4 1-1/4 8-1/16 10-9/16   500 2500
7/8 260 7/8 1-7/16 9-1/8 12   500 2500
1-1/8 400 1-1/8 1-13/16 9-7/16 13-1/16   500 2500
1-3/8 550 1-3/8 2 11-1/2 15-9/16   500 2500
1-5/8 920 1-5/8 2-1/4 12-3/8 7/8   500 2500
2-1/8 1335 2-1/8 2-3/4 15-3/16 15/16   390 1950
2-5/8 1730 2-5/8 3-1/8 18-1/16 15/16   340 1700
3-1/8 3830 3-1/8 3-7/16 20 1-1/4   300 1500
3-5/8 3830 3-5/8 4-1/8 24 1-1/2   175 525
4-1/8 4431 4-1/8 4-7/16 24 1-9/16   175 525
vibrationabsorber_2